Skip to content
Aback ZIP

How-to · 4 min read · Updated

How to split a ZIP file into smaller parts

Split a large ZIP into smaller ZIPs that each open on their own, or into exact byte chunks, and know which kind your recipient needs.

Upload forms, email and some USB drives cap file sizes, so a large ZIP sometimes has to travel in pieces. There are three quite different ways to split a ZIP, and picking the wrong one is the most common reason people end up with parts nobody can open. This guide explains them and shows how to split with Split ZIP in your browser.

Three kinds of split archives

KindTypical namesCan a part be opened alone?Made by
Independent ZIP partsarchive.part01.zip, archive.part02.zipYes. Each part is a complete ZIP holding some of the files.Split ZIP, Info-ZIP zipsplit
Byte chunksarchive.zip.001, archive.zip.002No. The chunks must be joined back into one file first.7-Zip Split to volumes, the split command, Split ZIP's byte-chunk mode
Spanned (split) ZIParchive.z01, archive.z02, archive.zipNo. It is one archive spread across files and needs a tool that understands spanning.WinZip, Info-ZIP zip -s

Independent parts are the friendliest choice for people: each opens with a double-click on any system, and a lost or damaged part only affects the files inside it. Byte chunks are useful when every piece must be an exact size or the original file must be rebuilt byte for byte.

Split a ZIP in your browser

  1. Open Split ZIP and choose the archive. Only its index is read to plan the split, so even multi-gigabyte archives are planned quickly.
  2. Pick how to divide it: by maximum part size (for example 15 MB for email), by number of parts, or one part per top-level folder.
  3. Check the preview. It shows how many parts will be created and roughly how big each will be.
  4. Start the split. Files are copied byte-for-byte into the new parts without being recompressed, and every part is checked after it is written.
  5. Download the parts, named archive.part01.zip, archive.part02.zip and so on.

If you need exact-size pieces instead, switch to byte-chunk mode. It produces archive.zip.001, archive.zip.002 and so on, which must be rejoined with Join ZIP Parts, 7-Zip or a copy /b or cat command before the ZIP can be opened.

Why part sizes are approximate

In size mode, Split ZIP never cuts a file in half: every file goes whole into one part, and every part carries its own headers and index. As a result:

  • Parts usually come out a little under the target, because the next file did not fit.
  • A single file bigger than the target gets a part of its own, and that part is larger than the target. The preview warns you when this happens.
  • Splitting cannot make a file smaller than its compressed size, so a 3 GB video cannot fit into 2 GB independent parts. Use byte chunks for that case.

Choosing a part size

DestinationTypical limitSuggested part size
EmailOften 20-25 MB per message15-18 MB
FAT32 USB drives and SD cards4 GB minus 1 byte per fileUp to about 4,000 MB
Upload forms and chat appsVaries by serviceThe stated limit minus 5-10% headroom

Email attachments are Base64-encoded in transit, which adds about 33%. Many mail servers count the encoded size, which is why a 25 MB limit often fits only about 18 MB of actual attachments.

Splitting with other tools

  • 7-Zip (Windows): right-click the files, choose 7-Zip > Add to archive..., set Archive format to zip and enter a size under Split to volumes, bytes. The result is byte chunks (.zip.001, .zip.002).
  • Info-ZIP (macOS and Linux): zip -s 100m -r archive.zip folder/ creates a spanned archive (archive.z01 … archive.zip). zipsplit -n 104857600 archive.zip instead splits an existing ZIP into independent ZIPs of up to 100 MB each.
  • Windows File Explorer and macOS Finder have no built-in way to split archives.

Tools for this

Frequently asked questions

With Split ZIP's default mode, yes: every .partNN.zip is a complete ZIP that opens on its own. Byte chunks (.001) and spanned parts (.z01) are not usable individually.

More guides